Porsche 996 TT Repair Manual page 529

Tightening torque of new spark plug 30 Nm (22 ftlb.); used spark plugs 25 Nm (19 ftlb.)
24. Install ignition coils. Insert ignition coils in spark−plug recess. Position 2 pan−head screws (hexagon
socket) M6 x 25 and tighten with tightening torque. Connect cable plug.
Tightening torque of pan−head screw M6 10 Nm (7.5 ftlb.)
Note
• Replace fastening nuts for holder of turbocharger!
25. Cylinder bank 1 − 3: Install fuel collection pipe with injection valves and holder for turbochargers.
26. Cylinder bank 4 − 6: Fit holder for turbochargers and install bypass flap control box on turbocharger.
Tightening torque of fastening nut M8 25 Nm (19 ftlb.)
27. Install coolant guide housing.
28. Install generator ' 272219 Removing and installing three−phase generator .
29. Install the oil container ' 175219 Removing and installing oil container .
Note
• Replace fastening nuts for flange of turbocharger rear mufflers!
30. Install rear mufflers.
Tightening torque of fastening nut M8 25 Nm (19 ftlb.)
996420, 996421, 996450, 996451, 996620, 996621, 996650, 996651
Checking camshafts
einordnung
466