Porsche 996 TT Repair Manual page 564

2. Install oil temperature sensor with new sealing ring.
3. Check throttle sealing ring and replace it if necessary. Fasten throttle body. Push on the electrical plug.
4. Install pressure pipe. Wet the connecting hoses between the charge air coolers and pressure pipe
with water at the connecting points and fit the hoses. The hoses must audibly engage. Then recheck
whether they are positioned properly by tilting and pulling on them.
Location
Oil pressure sender
996420, 996421, 996450, 996451, 996620, 996621, 996650, 996651, 996840, 996841
Installation
einordnung
Thread Tightening torque Nm (ftlb.)
30 (22)
501