Porsche 996 TT Repair Manual page 818

5. Disengage the coolant hoses in the area of the flanged shaft.
6. Pull vacuum pipe off the switch−over
valve.
7. Undo the left drive flange on the transmission side.
8. Remove the holders for the coolant
hoses.
9. Unlock the plug connection by turning it to the left and pull out the plug.
10. Unscrew the fastening screw for the pilot bushing using special tool assembly aid 9663 and pull out the
bushing.
11. Place oil collection pan under the transmission.
Removing the electrohydraulic control unit
einordnung
755