Porsche 996 TT Repair Manual page 929

No. Designation
1 Hexagon−head
bolt
2 Cover panel
3 Electrical plug
connection
4 Guide for bowden
cable
5−1 Bowden cable
Removing and installing bowden cable for lock actuation
Qty. Removal
2 Back off by 2 turns.
1 Lift out of the lower part of the lid
lock.
1 Disconnect.
1 Pull off.
1 Disengage nipple of bowden cable
−5−1− and press the cover out of the
lower part of the lid lock.
Pull the rubber sleeve
−arrow A− out of the closing panel.
einordnung
Installation
Tightening torque:−10 Nm (7.5
ftlb.)−
Position on lower part of lid lock.
Connect.
Push on.
Pull the rubber sleeve
−arrow A− in through the opening
of the closing panel.
Press in bowden cable cover −5−1−
and engage the nipple into the
lower part of the lid lock.
866