Installing Optical Contacts On Plug Side - Porsche 996 TT Repair Manual

2. Position tool at the primary lock and raise the lock.
−A− Optical contact,
grey
−B− Optical contact, black
3. Pull carefully on the optical waveguide, e.g. −B− in the −direction of the arrow− . If it is not possible to
pull out the optical waveguide, check again whether the secondary lock has been completely unlocked and
whether the primary lock has been raised far enough.
• Conduct a visual check of the locks, the connector housing and the contacts for any possible damage
and, if necessary, replace the damaged parts.

Installing optical contacts on plug side

Remove the protective dust cap immediately before the connection procedure.
•
• Check that the contact is in proper condition.
1. Push optical contact −B− into the plug until it engages audibly.
−A− Optical contact,
grey
−B− Optical contact, black
Removing optical contacts on plug side
einordnung
373