Porsche 996 TT Repair Manual page 553

Pull the lower connecting hose off the charge air cooler. To do so, lever the retaining clip out and pull the
hose downwards.
4. Undo the front fastening. Unscrew the fastening nut and the two fastening
screws.
5. Undo the bolts on the heat shield. Undo the two sheetmetal nuts on the lower end of the heat shield.
Then press the heat shield out of the studs.
6. Undo the rear fastening. Unscrew the fastening nut and the fastening
screw.
7. Remove charge air cooler.
8. Remove heat shield. To do so, unscrew the two upper fastening nuts.
9. Remove the cover panel. Unscrew the cover panel located above the plug coils.
10. Remove the adjacent plug coils. Unscrew the two hexagon socket head bolts for this purpose. Pull out the
plug coils and hang them to one side.
11.
Removing the hydraulic valve
einordnung
490