2. Insert the support brackets −E− in the correct position in the shift console. It must be possible to hear and
feel the support brackets engage.
A Selector cable (blue)
B Shift cable (black)
C Adjuster open
D Adjuster closed
E Support bracket sleeve
3. Engage the shift cable −B− and selector cable −A− in the open adjusters −C− and close the
adjusters (see magnified view). The locking sleeves on the adjuster must move to the end position
automatically.
4. Remove special tool (locking bridge) 9619 and shift through all gears as a
test.
5. Clip in shift console cover.
6. Install centre console ' 68 17 19 Removing and installing centre
console.
top of page
Tightening torques
Location
Shift console fastening screws
996420, 996421, 996450, 996451, 996620, 996621, 996650, 996651
Installing shift console
einordnung
Thread
Tightening torque Nm (ftlb.)
M6
10 (7.5)
714