Porsche 996 TT Repair Manual page 856

1 Front centre console support
2 Holder
3 Rate−of−turn sensor
4 Bow over rate−of−turn sensor
5 Cable guide
6 Plug (Item X = adapter plug that is installed between the new rate−of−turn sensor and the existing
plug).
The table below for the 911 Turbo (996) provides an overview of the part allocation for replacement of a
rate−of−turn sensor 996.606.147.00 (first version).
Component SP No. / explanation
PSM control 996.618.149.01
module (Installed as standard)
Hydraulic unit 996.355.955.51
(Installed as standard)
Rate−of−turn 996.606.145.00
sensor (Item 3)
Adapter plug 996.622.901.00
(Item X) The adapter plug (adapter lead)
is installed between the new
rate−of−turn sensor and the
existing plug
Holder (Item 2) 996.552.309.08
Front centre 996.552.267.05
console support
(Item 3)
Bow over the 996.606.143.00
rate−of−turn Omitted
sensor (Item 4)
Cable guide (Item 996.610.224.00
5) Omitted
Overview of rate−of−turn sensor conversion
einordnung
793