Removing Knock Sensor, Cylinder Bank 4 − 6 - Porsche 996 TT Repair Manual

Removing knock sensor, cylinder bank 4 − 6
1. Remove the oil container ' 175219 Removing and installing oil container
2. Undo the crankcase ventilation tube. Unscrew the union nut −arrow− for this
purpose.
3. Remove crankcase ventilation tube. Unscrew the two M6 screws −arrows− for this
purpose.
4. Disconnect plug −lower arrow− of the knock sensor and set it
aside.
5. Unscrew screw −upper arrow− of the knock sensor and remove the knock sensor.
top of page
Removing knock sensor, cylinder bank 4 − 6
einordnung
660