27. Immediately secure the bracket with a shorter auxiliary screw (M10 x 55).
28. Loosen and remove belt guard on the coolant pump.
29. Loosen hose clamp and pull coolant filler hose off the coolant pump.
30. Undo fastening screws of the coolant pump.
31. Remove coolant pump and dispose of seal.
top of page
Installation
1. Clean sealing surfaces.
2. Install a new seal onto the coolant pump.
Tightening torque: 10 Nm (7.5 ftlb.).
3. Install belt guard.
4. Fasten coolant filler hose onto the coolant pump.
Installation
einordnung
534