Porsche 996 TT Repair Manual page 903

Basic setting of the push rod −dimension X− is 138 mm (set in new brake boosters)! If necessary, correct
during the relevant work!
2. Insert brake booster with bellows −B− and tightened clamps
−6− .
Note
• Do not trap wiring harness!
3. Tighten fastening screws (Torx T 45) −arrow− to 23 Nm (17
ftlb.).
4. Connect the 2 push rods. To do so, mount the fastening nuts
−arrow−
Note
Installation
einordnung
840