Installing Main Headlight - Porsche 996 TT Repair Manual

1. Release the side carpet by unscrewing plastic nut −A− −arrow− .
2. Pull rubber stopper −B− off the release opening.
3. Place the socket wrench from the tool kit on the release axle.
4. The toggle of the socket wrench should point horizontally to the rear.
5. Turn the socket wrench through approx. 180º −arrow A− and leave it in position.
6. The headlight is now unlocked and can be pulled forwards out of the wing.
7. Turn the socket wrench back until it points vertically −arrow B− downwards.
top of page

Installing main headlight

Note
• Do not attach any covers (e.g. stone shields or films) in the area of the headlights.
Removing main headlight
einordnung
133