A Closure cap
Removing closure cap for selector force mechanism
1. Remove engine−transmission unit.' 10 01 19 Removing and installing engine.
2. Shift transmission to neutral, unscrew fastening screw −A− and remove snap ring −B− .
A Fastening screw
B Snap ring
C Closure cap
3. Bore a 3.5 mm hole into the centre of the closure cap (coat drill with viscous grease to prevent
drilling chips from falling into the transmission). Screw in a sheetmetal screw (4.8 x 25) with a
large washer and lever out the closure cap using two screwdrivers.
Removing and installing closure cap for selector forcemechanism
einordnung
725