Porsche 996 TT Repair Manual page 659

No. Designation
1 Pan−head screw M6
x 16
2 Oil−pump cover
3 O−ring 68 x 2
4 Oil pump gear 1
5 Oil pump gear 2
6 O−ring
7 Bracket
8 O−ring 28.0 x 4.5
9 Connection fitting
10 Dust protection ring
1. Raise the vehicle at the prescribed jacking points.
2. Disconnect
battery.
3. Open engine compartment lid.
4. Remove rear spoiler. Serv. No.: 63 55
19
5. Remove bumper with shield.
Removal
einordnung
Qty. Removal Installation
4 When tightening, simultaneously check operating
smoothness of the oil pump.
1 Check for signs of scoring
1 Replace; ensure correct position
Grease with Optipit
Grease with Optipit
Replace; apply a thin coat of Vaseline
4 Replace; coat with coolant
2
2 Check, replace if necessary
596