Porsche 996 TT Repair Manual page 143

Refit the retaining clips
immediately.
3. Undo hose clamp.
Undo the hose clamp −arrow− between the air cleaner housing and the intake
pipe.
4. Remove air
cleaner
housing.
Unscrew the fastening screw M6 x 34 at the rear of the air cleaner
housing.
5. Tilt air cleaner housing outwards.
Tilt the housing upwards and to the right by 90° and then turn the housing to the left by approx. 90°.
6. Unclip the hot film mass air flow meter cable.
a. Open the omega clip on the left side of the air cleaner housing and take out the
cable.
b. Take the air cleaner housing out of the engine
compartment.
Removing air cleaner
einordnung
80