•
The mount is positioned correctly if one of the 3 fastening pins is aligned with the holder on the
damper tube!
7. Position the spring strut mount for installation (correctly position spring strut mount with respect to
the damper).
8. Tighten the fastening nut once the mount has been correctly positioned and the coil spring lies properly
against the stop. Tightening torque 58 Nm (43 ftlb.).
•
Never use an impact bolter to tighten the fastening nut!
9. When tightening the fastening nut, hold at the piston rod using a special tool 9630 countering tool
or a 7 mm open−ended wrench.
996420, 996421, 996450, 996451, 996620, 996621, 996650, 996651
Assembly
einordnung
352