Installing The Hydraulic Valve - Porsche 996 TT Repair Manual

Remove the fastening plate of the switch−over valve. To do so, unscrew the two hexagon−head bolts and
remove the plate.
12. Remove the switch−over valve. To do so, disconnect the electric plug. Press the sheetmetal braces of the
plug and pull the plug out at the same time. Then pull the switch−over valve out of the cylinder head.
WARNING
Take care of the coil spring!
During removal and installation, make sure that the coil spring is present and does not remain in the camshaft
housing.
View of the valve
top of page

Installing the hydraulic valve

1. Replace O−ring. Replace the O−ring on the hydraulic valve.
Installing the hydraulic valve
einordnung
491