The following accessories must be removed for the work operation "Disassembling and assembling frame for
sliding roof"! ' 708419 Removing and installing roof lining ' 602819 Removing and installing frame for
sliding roof
Note
•
The following parts must be transferred from the sliding roof frame to be replaced to the new sliding
roof frame: Lifting/sliding roof drive, draught deflector, frame clips
No. Procedure
1
Removing draught
deflector
2
Removing frame clips
3
Removing lifting/sliding
roof drive
Disassembling frame for sliding roof
einordnung
Instructions
Fold the draught deflector up, press it inwards and out of the guides at
the left and right sides and pull it out.
Press in the left and right tabs of the frame clip −A− .
Unscrew both Torx T25 fastening screws and take lifting/sliding roof
drive down and off the teeth of the sliding roof frame.
918