Porsche 996 TT Repair Manual page 567

3. Install pressure pipe. Wet the connecting hoses between the charge air coolers and pressure pipe with
water at the connecting points and fit the hoses. The hoses must audibly engage. Then re−check whether
they are positioned properly by tilting and pulling on them.
4. Install air cleaner assembly ' 24 25 19 install and remove air cleaner .
Location
Oil temperature sensor
996420, 996421, 996450, 996451, 996620, 996621, 996650, 996651, 996840, 996841
Installation
einordnung
Thread Tightening torque Nm (ftlbs.)
30 (22)
504