44 05 19 Removing and installing the wheel − Turbo
and GT2
Wheel mounting − Turbo and GT2
Removing/installing the wheel on vehicle − Turbo and GT2
top of page
Wheel mounting − Turbo and GT2
•
The wheels of the Turbo and GT2 are mounted with series wheel bolts −A− M14 x 1.5 (length 45
mm) dimension −X− !
•
The intially planned procedure of using GT3 wheel bolts −B− M14 x 1.5 (length 50 mm) dimension
−X− is not applicable! Previous written publications should be altered accordingly!
Wheel bolts
A
Series wheel bolt (Turbo and GT2) dimension X approx. 45
mm
B GT3 wheel bolt dimension X approx. 50 mm. Designation with GT or red color (arrow).
top of page
Removing/installing the wheel on vehicle − Turbo and GT2
Note
•
Use suitable commercially available tools (wrench size 19 mm)! Never use an impact bolter to tighten
the wheel bolts!
•
Before the wheel is placed on the wheel hub, regrease the centering surface of the wheel hub (if
required) as necessary with a very thin coat of Optimoly TA (aluminium paste)!
•
The wheel bolt consists of two parts that are permanently joined together! Other wheel bolts must not
be used!
CAUTION
44 05 19 Removing and installing the wheel − Turbo and GT2
775