17 40 19 Removing and installing oil cooler
removed
Removing oil cooler
Installing oil cooler
The following prelimiminary work must be carried out:
•
Remove and install oil container => Removing and installing oil container.
•
Remove intake distributor ' 244619 Removing and installing intake distributor .
top of page
Removing oil cooler
1. Remove crankcase ventilation tube. Unscrew the two M6 screws −arrows− for this
purpose.
2. Undo the union nut −arrow− and remove the crankcase ventilation tube.
3. Undo the holder behind the oil cooler. Unscrew the M6 screw −arrow− for this purpose.
17 40 19 Removing and installing oil cooler
Engine removed
Engine
510