Component Exchange After Airbag Triggering; After Triggering Of The Side Airbag Unit; After Triggering Of Belt Tensioner - Porsche 996 TT Repair Manual

Component exchange after airbag triggering

The following components must be removed and replaced after the airbag system is triggered:
After triggering of the airbag unit on the driver's side:
Contact unit
•
• Airbag unit, driver's side
After triggering of the airbag unit on the passenger's side:
Airbag unit, passenger's side
•
• Triggering unit after the third time the airbag is triggered

After triggering of the side airbag unit

• Side airbag unit
Sensor for the side airbag unit after the third time the side airbag is triggered
•

After triggering of belt tensioner

After triggering of a belt tensioner, driver's and/or passenger's unit.
After triggering one or more air bag units (driver's, passenger's and/or side airbag).
• All belt tensioner units
Note
• Because it is difficult to visually determine if one or both belt tensioners has been triggered, check the
following points.
• Read out the airbag fault memory with the Porsche System Tester.
• Check plug connection on the belt tensioner for damage.
Pull out the belt strap as far as possible and check for wear.
•
• Perform a function test on the automatic belt device.
Component exchange after airbag triggering
einordnung
996420, 996421, 996450, 996451, 996840, 996841
314