Note
•
All dimensions are measured on the body shell (with units removed) middle hole or middle screw
connection point. The dimensions are measured directly and, therefore, are oblique dimensions. Refer
to the relevant vehicle views for the positions of the measuring points. The measuring points are
identified for the right or left side in relation to the direction of travel (viewed from above).
Dimensions which are only specified for the left side of the vehicle also apply to the mirrorred image
on the right side of the vehicle.
Note
•
The specified dimensions are used only for an approximate estimation of possible structural damage.
Repairs to the vehicle must be done using an alignment system.
Structure dimensions for cabriolet
einordnung
181