Porsche 996 TT Repair Manual page 300

2. Screwing on processing nozzle −H8−
b. Screw processing nozzle −H8− onto the mixing nozzle −H7−
.
3. Screwing on mixing nozzle −H7−
c. Screw both cartridges onto the mixing
nozzle.
4. Placing mixing cartridge in the double cartridge gun
d. Move pressure piston back
fully.
e. Place double cartridge −H5, H6− in the bonding gun −A−
.
5. Mixing adhesive components
f. By activating the valve −arrow− allow the pressure piston to move out slowly until the adhesive is
visible in the processing pipe.
Combined procedure (handling double cartridge press)
einordnung
237