Porsche 996 TT Repair Manual page 290

10. Separating glass as far as P2
t. Position deflection roller in the lower right
corner.
u. Press deflection roller with fastening intake firmly against
the glass.
v. Fix fastening intake onto the glass by moving the actuating
lever.
w. Pass cutting thread over the deflection roller onto the spooling
device.
x. Separate glass by spooling the cutting thread on the spooling device as far as point −P2− .
Note
The fastening force can be increased by moistening the fastening intake.
•
11. Separating glass as far as P3
y. Release spooling
device.
z. Position deflection roller in the upper right
corner.
aa. Press deflection roller with fastening intake firmly against
the glass.
ab. Fix fastening intake onto the glass by moving the actuating lever.
ac. Pass cutting thread over the deflection roller onto the spooling
device.
ad. Separate glass by spooling the cutting thread on the spooling device as far as point −P3− .
Note
• The fastening force can be increased by moistening the fastening intake.
Removing glass with cutting wire separator
einordnung
227