•
The parking aid is activated for the respective seat position saved!
Activation of the parking aid must be carried out individually for every seat position!
•
top of page
Deactivating the parking aid without PST 2
1. Switch ignition on.
2. Disengage reverse gear if
necessary.
3. Adjust both door mirrors to desired
positions.
4. Adjust seat to desired position.
5. Save seat position.
Press M and corresponding seat memory position ( 1 , 2 or 3 ) simultaneously.
Note
•
The parking aid is now deactivated for the respective seat position!
top of page
Activating the parking aid with PST 2
1. Connect the PST2 with the ignition off, then switch the ignition on.
2. Switch on the PST2 and wait for the start−up screen.
3. Press the >> key to go to the next level.
4. Select the vehicle type 911 (996) Turbo in the left−hand window using the v
key.
5. Press the −−> key to activate the right−hand window.
6. With the v key, select the Seat memory control module and press the >> key to go to the next level.
7. With the v key, select Modify coding and press the >> key to go to the next level.
8. With the v / ^ key, select the menu item Parking aid for position 1 or Parking aid for position 2 or
Parking aid for position 3 .
9. Press the >> key to alter the coding.
10. Select the menu item −activated− using the v / ^ key.
11. Press key F8 (coding)
Note
•
The parking aid is now activated for the respective seat position!
Activating the parking aid without PST 2
einordnung
48