3
Pull LED unit out into the
door handle
Installing orientation lighting (LED light−emitting diodes)
No. Procedure
1
Insert LED unit into the
door handle
2
Install light−emitting
diode housing −1−
3
Install light−emitting
diode housing −2−
Removing orientation lighting (LED light−emitting diodes)
einordnung
Pull LED unit out of the door handle to the rear.
Instructions
Insert LED unit into the door handle from the rear.
Insert the light−emitting diode housing −1− into the guide of the door
handle until the lug −arrow− engages.
Position the light−emitting diode housing −2− into the door handle.
The cable −arrow A− must point downwards. Push cover −3− into the
906