Assembling Rear Lid - Porsche 996 TT Repair Manual

7 Remove fan with fan housing
−11−
8 Undo mount −13−
9 Remove pump unit −17−
with extension elements
−15l− and −15r−
10 Remove additional brake
light holder −19−
Pull off model logo
top of page

Assembling rear lid

Assembling rear lid
einordnung
Disconnect plug connections for fan and engine compartment
lighting on the fan housing. Unscrew fastening screws −10−
and remove fan with fan housing −11− .
Unscrew fastening screws −12− .
Pull mount −13− gently forwards and unscrew the fastening
screws −16− of the pump unit −17− . Remove mount −13− .
Unscrew the fastening screws −14− of the extension elements
−15l− and −15r− . Remove pump unit with extension elements.
Note:
Do not kink hydraulic lines!
Unscrew fastening screws −18− . Take off additional brake
light holder −19− .
890