Porsche 996 TT Repair Manual page 594

12. Undo fastening screw M 6 x 34 on the air cleaner housing.
13. Undo hose clamp between the air cleaner housing and intake manifold.
14. Tilt the complete air cleaner housing 90° upward and then remove from the engine compartment.
15. Pull off the connecting hoses between the charge air coolers and the pressure pipe:
• Unclip the locking clips using a screwdriver and pull off the hose.
• Then clip the locking clips in again.
Undo the right fastening screw on the refrigerant line.
•
16. Remove pressure pipe:
• Disconnect connector on the temperature pressure sensor −arrow 4− .
• In order to do this, undo 2 spring band clamps and 1 screw−type hose clamp A/f 7 (−arrow 5− and
−arrow 3− , 1 hose clamp not illustrated) and 3 hexagon−head bolts A/f 10 (−arrow 1− and −arrow
Removal
einordnung
531