01 Diagnostic system: Read out fault memory and
activate systems
Activating systems
Read out fault memory
Load Navigation
top of page
Activating systems
Note
•
The work procedure is menu−prompted, the Tester instructions have highest priority, further actuation
is specified using the arrow symbols e.g., >> .
1. Connect the Porsche System Tester to the vehicle and start the System Tester. Switch on ignition. Press
>> to continue.
2. Select Special functions menu using the cursor keys.
3. Change to Sports car analysis and start. After analysis was carried out, print out analysis log and
assign to vehicle procedure.
4. '| Select vehicle type. Change to Sports car hand
over .
5. Observe Tester instructions and code >> using F8 .
6. Enter the required chassis number >> .
7. Pay attention to the instructions from the Tester All functions carried out and PCM/CDR was activated .
>> . Continue with => Read out fault memory.
top of page
Read out fault memory
•
Porsche System Tester connected to vehicle and System Tester started. Ignition switched on.
1. Select vehicle type. >>
Note
01 Diagnostic system: Read out fault memory and activate systems
37