Installing Closure Cap For Selector Force Mechanism; Tightening Torques - Porsche 996 TT Repair Manual

Installing closure cap for selector force mechanism

1. Insert closure cap and snap ring into the housing bore.
2. Use special tool (press−out mandrel) P 375 to push the snap ring and closure cap down until the snap ring
engages in its groove.
Note
• Ensure perfect seating of the snap ring.
3. Tighten fastening screw for gear housing.
Tightening torque: 25 Nm (19 ftlb.)
4. Install engine−transmission unit. ' 10 01 19 Removing and installing engine.
top of page

Tightening torques

Location
Gear housing on transmission housing
996420, 996421, 996450, 996451, 996620, 996621, 996650, 996651
Installing closure cap for selector force mechanism
einordnung
Thread Tightening torque Nm (ftlb.)
M8 25 (19)
726