Removal - Porsche 996 TT Repair Manual

New/current version: Rate−of−turn sensor with part No. 996.606.145.00.
top of page

Removal

Note
• For the removal and installation of the hydraulic unit −D− , the booster pump −A− of the brake
master cylinder −B− and the brake booster −C− remains fitted (installed).
1. Switch off ignition. Remove cover −A− from the hydraulic unit/brake
unit.
2. Hold down brake pedal with pedal holder , so that the brake fluid does not run out of the expansion tank
completely.
Replacing the hydraulic unit
einordnung
785