Porsche 996 TT Repair Manual page 555

2. Press the hydraulic valve into place. Insert the hydraulic valve into the camshaft housing and press it
firmly into place. Place the retaining cover in place. Pay attention to the cut−out on the fastening
arm.
Note
• In order to make it easier to position the hydraulic valve, a socket with an extension of wrench size 20
may be used.
3. Position the two fastening screws and screw them in evenly. Tighten screws to 10 Nm (7.5 ftlb.)
4. Install the plug coils. Place the adjacent plug coils on the spark plugs again. Tighten the two fastening
screws to 10 Nm (7.5 ftlb.).
5. Install heat shield. Tighten the two fastening screws to 10 Nm (7.5 ftlb.).
6.
Installing the hydraulic valve
einordnung
492