Porsche 996 TT Repair Manual page 669

10. Fit oil lines for the left−hand side. Use new O−rings.
11. Fit coolant lines over the coolant pump. Use water or coolant to facilitate fitting.
Note
• If incorrectly positioned, the generator bracket would make contact and cause leaks.
12. Remove auxiliary screw.
13. Fasten engine carrier.
Tightening torque 65 Nm (48 ftlb.).
14. Fasten engine carrier on the engine mounts (wrench size 18).
Tightening torque: 85 Nm (63 ftlb.).
Installation
einordnung
606