44 35 19 Removing and installing valve (steel valve)
(Turbo ll wheel)
General
Notes on removal and installation
Removal
Installation
top of page
General
The steel valve must always be replaced when changing a tyre!
CAUTION
Loss of tyre pressure if the installation position of the components is not observed and the original Porsche SP
parts are not used when installing the steel valve.
•
Fix disc into the correct position using the O−ring and the fastening nut!
•
Only use the original valve cap!
top of page
Notes on removal and installation
•
Do not use commercially available steel valves. The Porsche valves (part nos. 993.361.073.00) are
shorter (dimension X). −Dimension X− is approx. 43 mm for the Porsche version!
•
The complete valve only is available as a spare part. See Spare Parts catalogue!
•
The valve insert is commercially available!
44 35 19 Removing and installing valve (steel valve) (Turbo ll wheel)
778