15 19 Removing And Installing Brake Master Cylinder; Removal - Porsche 996 TT Repair Manual

47 15 19 Removing and installing brake master
cylinder

Removal

Installation
top of page
Removal
Note
• The booster pump −1− remains fitted (installed) during removal and installation of the brake master
cylinder.
1. Remove cover −A− from the hydraulic unit/brake
unit.
2. Remove brake fluid from reservoir using
suction.
3. Disconnect the electrical line (plug) on the reservoir.
4. Remove suction line of booster pump −2− .
5.

47 15 19 Removing and installing brake master cylinder

834