38 20 Removing And Installing The Rear Disc Brake Pads; Removal - Porsche 996 TT Repair Manual

46 38 20 Removing and installing the rear disc brake
pads
Caution

Removal

Installation
WARNING
Danger of accident if brake pads with the wrong brake pad quality are installed!
Use only the type−specific brake pads in the Porsche Spare Parts Catalogue!
•
The pad backing plates (rear side of the brake pads) must not be greased.
Replace vibration dampers each time the pads are changed.
The damper plates have an adhesive protective film. The protective film must be pulled off before installation.
top of page
Removal
1. Remove the retainer (safety bracket) −arrow− and extract the retainer pin inwards.
2. Pull out the warning contact wire on the brake caliper and remove the warning contacts from the
brake pad plates.
3. Pull out the warning contact wire on the brake caliper and remove the warning contacts from the
brake pad plates.

46 38 20 Removing and installing the rear disc brake pads

813