Installation
WARNING
Malfunctions of the driver's airbag unit possible! Do not trap the cable of the contact unit. Ensure correct
routing!
1. Refit the steering wheel with the wheels in the straight−ahead position or after disassembly with the
marking so that the upper spokes of the steering wheel are horizontal.
2. Fit hexagon nut −arrow− with spring washer and tighten to 45 Nm (33
ftlb).
3. Install driver's airbag unit. Use new fastening screws. Tightening torque: 10 Nm (7.5
ftlb.).
4. Check horn for operation.
996420, 996421, 996450, 996451, 996620, 996621, 996650, 996651, 996840, 996841
Installation
einordnung
845