CAUTION
Damage to the bowden cable when removing door trim panel!
Damage by bending the bowden cable at the hook!
•
Pull the hook out of the end piece only after installation in the inner door release!
No. Designation Qty. Removal
1
Door trim
1
panel
2
Bowden
1
cable
57 37 19 Removing and installing inner door release (bowden cable) for door lock
' 705919 Removing and installing door
trim panel
Door handle side:
Press the lugs of the plastic clip −A−
and extend to the rear. Push bowden
cable back into the end piece of the
sleeve −B− .
einordnung
Installation
Door handle side:
Engage bowden cable in the door
handle −2− .
Pull the hook out of the end piece of
the sleeve only after installation in the
door handle. Plastic clip into the door
901