Porsche 996 TT Repair Manual page 508

1. Remove air cleaner assembly
Remove the complete air cleaner assembly.
a. Undo hexagon−head bolt M6 x
34.
b. Undo the hose clamp on the throttle
body.
c. Pull off plug from hot film mass air flow sensor and remove air cleaner assembly.
2. Loosen servo pump wheel
d. Mark belt travel direction with a coloured
pen.
e. Undo the three −hexagon−head bolts− on the servo pump by approx. one half
turn.
3. Relieve drive belt
Relieve drive belt. To do this, turn the tensioning roller clockwise and simultaneously remove the belt
from the drive pulleys.
Remove drive belt
einordnung
445