Porsche 996 TT Repair Manual page 598

5. Remove auxiliary screw again.
6. Fasten engine carrier onto the bracket.
Tightening torque: 65 Nm (48 ftlb.).
7. Fasten engine carrier onto the engine mounts (a/f 18).
Tightening torque: 85 Nm (63 ftlb.).
8. Remove special tool (retaining device) 9624/1 .
9. Fasten
stabilizer.
Tightening torque: 25 Nm (18 ftlb.).
10. Install rear mufflers with new seals. The seals between the exhaust turbochargers and the rear muffler
must be replaced. Move the rear muffler into installation position and push the two tensioning straps over
the holder on the engine carrier. Subsequently tighten the two hexagon socket head bolts slightly.
Installation
einordnung
535