Rear front−axle transmission support to body
Front front−axle transmission support to front−axle cross
member
Stud to front−axle cross member
Front−axle transmission support at front to final drive
Tank strap to body
top of page
Stabilizer
Location
Stabilizer to side member
Stabilizer mount to stabilizer
Stabilizer mount to spring strut
(Turbo and 911 GT2)
911 GT2
Stabilizer mating bearing to spring strut (lock nut)
top of page
Steering
Location
(Unlisted values in Repair Group 48!)
Track rod (ball joint pin) on steering arm
Universal joint (steering shaft) at steering gear **
Steering gear on cross member ***
1) **
Replace fit bolt whenever it has been removed.
2) ***
Replace fastening screws whenever they have been removed.
top of page
Wheel fastening
Location
Wheel to wheel hub ****
1) ****
Thinly grease thread, shank and under head (between screw head bearing surface and spherical cap ring)
of the wheel bolts with Optimoly TA (aluminium paste). Do not grease bearing surface of the spherical cap
Front−axle final drive/drive shaft (Turbo)
einordnung
M10
M10
M8
M10
M8
Thread
M10 x 1.5
M10
M10
M52 x 1.5
Thread
M12 x 1.5
M8
M10 x 1.5
Thread
Tightening torque Nm (ftlb.)
M14 x 1.5
65
65 (48)
20 (15)
65 (48)
23 (17)
Tightening torque Nm (ftlb.)
65 (48)
46 (34)
46 (34)
50 (37)
Tightening torque Nm (ftlb.)
75 (56)
** 1)
23 (17)
*** 2)
65 (48)
**** 1)
130 (96)
253