3. Place the air cleaner housing in the engine compartment as shown and move into installation position.
c. Turn the housing to the right by approx. 90° and push the rubber hose over the
flange.
d. Swivel the housing
downwards by 90°.
4. Tighten the fastening screw M6 x 34.
Tightening torque: 10 Nm (7.5 ftlb.)
5. Tighten the hose clamp
on the connecting hose.
Reconnect the plug on the hot film mass air flow
sensor.
Note
•
The plug must engage audibly!
Installing air cleaner
einordnung
83