•
Ignition and preparations may only be carried out by skilled staff, supervised by a second responsible
person!
Other normal accident prevention regulations must also be observed!
•
•
Ignite airbag units only in their securely installed, original condition!
•
Carry out ignition only in suitable, free areas!
•
Use only the ignition tool intended for that purpose!
•
All loose objects must first be removed from the expansion area of the airbag!
•
Persons possibly affected must be informed of the resulting noise beforehand!
•
Use ear protectors!
Maintain a safety distance by utilising the entire cable length of the ignition tool!
•
•
Do not connect the voltage source until all other preparations are complete!
•
Choose a place in front of the vehicle. This also applies to persons not involved!
•
Perform ignition with the doors closed and the side windows open!
•
Do not approach the vehicle until after a waiting period (approx. 3 minutes) if ignition fails!
Allow airbag units to cool down under observation following ignition!
•
•
Avoid skin contact with ignited airbag units!
top of page
Tools
Ignition cable for belt tensioner
Item
Designation
A
Ignition device
Safety measures when igniting airbag units
einordnung
Special tool
9257*
Remarks
360