Porsche 996 TT Repair Manual page 630

Clip in hot film mass air flow sensor cable. To do this, insert the cable into the omega clip on the left
air cleaner housing side and then close the clip.
18. Place the air cleaner housing in the engine compartment as shown and move into installation
position. To do this, first turn the housing to the right by approx. 90° and push the rubber hose
over the flange. Then swivel downwards by 90°.
19. Tighten the fastening screw M6x34 to 10 Nm (7.5 ftlb.).
20. Tighten the hose clamp on the connecting hose. Reconnect the plug on the hot film mass air flow sensor.
The plug must engage audibly!
21. Attach the connecting hose between the left turbocharger and the intake distributor. The hose must
engage audibly!
996420, 996421, 996450, 996451, 996620, 996621, 996650, 996651, 996840, 996841
Removing fuel filter
einordnung
567