12. Let a second person lift the crankshaft slightly and push bearing no. 8 onto the crankshaft journal.
13. Lower the crankshaft slowly and insert crankshaft bearing no. 8 into the dowel pin.
14. Check installation position. If the mounting is correct, the centre of the bearing notch should be on the
same level as the sealing surface.
Note
•
Oil sealing lip
Insert crankshaft sealing ring in the crankcase.
15. Grease sealing ring (19.5 x 26) on both sides and insert it into the crankcase half 4 − 6 in the area of the
oil pump mount.
Assembling the crankcase.
einordnung
402