2. Undo rear hose clamp between the air cleaner housing and intake
manifold.
3. Tilt the complete air cleaner housing 90 ° to the left and remove to the
rear.
4. Push rubber sleeve of special tool 9264/6 onto the plug.
5. Insert plug with rubber sleeve into the sealing bellows and fasten with the original hose
clamp.
6. Generate a pressure of approx. 0.5 bar. Larger leaks are very easy to hear once the pressure has
built up; smaller leaks can be made visible with a leak−locating spray.
996420, 996421, 996450, 996451, 996620, 996621, 996650, 996651, 996840, 996841
Leak test
einordnung
621