Installation
Part 1: Powering Down the UX5000 and Removing the CCPU Blade
Checking the CPU LEDs and Powering Down
Before powering down, you must check the CCPU blade LEDs.
1.
Carefully check the CCPU LEDs (Figure 2: Checking the CCPU LEDs).
2.
Turn the power switch to OFF ( 0 ).
Power
Switch Power
LED
3.
Wait about 5 seconds for the UX5000 to shut down.
2 ◆ IntraMail Installation
Make sure that LED1 (the Run LED) is the only LED flashing on the CPU.
1a.
( LED1 flashes green 1/2 second on and 1/2 second off.)
If any other LEDs on the CPU are flashing, wait until they stop.
1b.
If you turn off the UX5000 while LEDs other than LED1 are flashing, data could become
1c.
corrupted as the UX5000 powers down.
Run
Off
LED
Off
Off
Figure 2: Checking the CCPU LEDs
The blue LED adjacent to the power switch will go out.
3a.
UX IntraMail Manual