Figure 2-7 Removing The Sub-Cover; Figure 2-8 Sub-Cover Open Position; Figure 2-9 Mounting The Ksu - NEC SL1100 Hardware Manual

SL1100
4. Pull out the Sub-Cover by pushing out the tabs.
• The Sub-Cover can be opened and held in the open position.
5. Align the four holes on the back of the KSU with the four screws installed in the wall.
Screw head
Screw head
6. Slide the KSU into position and tighten the lower two screws.
2-6
Sub-Cover
Tab

Figure 2-7 Removing the Sub-Cover

Push to hold

Figure 2-8 Sub-Cover Open Position

Hook

Figure 2-9 Mounting the KSU

Tab
Open
Fasten screws
ISSUE 4.1 (R5.1)
Installation