Handling Riser Modules - Fujitsu PRIMERGY RX2540 M2 Upgrade And Maintenance Manual

Basic hardware procedures
4.8

Handling riser modules

Note for installation with expansion cards in slot 5 and slot 11
Figure 14: Removing a connector from an expansion card in a riser in slot 5 or 11
Ê Insert a small tool (e.g. a small slotted screw driver) in the gap between the
connector and the housing (1).
Ê Press down the locking mechanism (2).
Upgrade and Maintenance Manual 83
RX2540 M2